Sample Bracket (DXF)
About This File
A simple 100 mm × 50 mm L-bracket with a single 90° bend line at the midpoint and two 5 mm mounting holes on each flange. Outer profile on the CUT layer, bend line on BEND_1. Ready to upload to the Part Uploader.
Use this file to familiarise yourself with the upload flow, DFM analysis output, and pricing before uploading your own design.
Sample Bracket
100 × 50 mm L-bracket, 90° bend, 2× 5 mm holes per flange — DXF (AutoCAD 2000)
3 KB